Questions & Answers for: KTM 125 EXC screw heads

Ad

Question about 2006 125 EXC

2 Answers

...use a ruler and when it hit 9cm pump the forks then measure again if gotten lower top back up then screw the caps back on 5w is the correct oil, but if you only have a air gap of 90mm/9cm this is ...

Ad

...Exercise care and caution on the small springs, washers, spacers and o-rings. If the air idle mix screw would be removed, count the number of turns from fully in. Good luck and thank you for asking ...

Ad

...screw. If they slide off, you may have to file flat spots on the sides of the screws. Another way is to cut grooves in the heads of the screws with a Dremel motor tool and grinding disk. Another way ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2006 KTM 125 EXC
2006 KTM 125 EXC

-2 Questions

2009 KTM 125 EXC
2009 KTM 125 EXC

-1 Questions

Manuals & User Guides

Loading...