Questions & Answers for: Jeep Grand Cherokee screw heads

Ad

changing 1997 jeep grand cherokee head light assembly I cant figure out how to remove the head lamp assembly You have to remove the grill and yu will see mounting screws. Consult the haynes manual for

Ad

What is the name of the screws that hold down the plastic cowl piece where the wipers come out? The screw heads are star shaped. Thanx torx screws.

Ad

...has to come out to replace the headlight bulb. Here's how to do it. REMOVAL: Remove the jack screw attaching the top of the head lamp to the head lamp mounting module. 2. Grasp the upper ...

Question about 2000 Grand Cherokee

1 Answer

...head lights Hi if you open the bonnet and stand in front of the head light there will be one screw on the top of the head light once removed (to make sure that it is the right screw it is

Question about 2001 Grand Cherokee

2 Answers

...replace headlights bulbs How to replace headlights bulbs in a grand cherokee 2001 Remove the jack screw attaching the top of the head lamp to the head lamp mounting module. Grasp the upper inboard ...

...pulled out the front. Some were made with sealed beams the wire pulls off the back and the top two screws can be removed pull the frame around the light out and down and the sealed beam can be

...in france YES. You can adjust the head lamps as per your requirements. Look for the mounting screws on back side of the head lamps. One screw with philips head will be able to adjustable for ...

...the negative battery cable from the Jeep Cherokee battery with the 10 mm wrench. 2 Remove the five screws on the top edge of the dash panel with a Phillips-head screwdriver. 3 Pry the trim panels ...

Question about 1996 Grand Cherokee

1 Answer

left hand head light adjustment screw cant find anything to fit screw if its a hex head its probably a 4 or 5 -5.5 metric

Question about 2004 Grand Cherokee

1 Answer

how do i get the nuts off to replace the throttle sensor on my 04 jeep YOU NEED CERTAIN TYPE SOCKET IF SCREWS LOOK LIKE STAR YOU NEED TORX HEAD SOCKETS TO REMOVE THROTTLE POSITION SENSOR SCREWS.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...