...most BMW brake rotors you don't remove the center nut to remove the rotor. You should see a slotted screw in the rotor a couple of inches out from the center. Remove it and the rotor comes off. Might ...
...is out of adjustment. My right headlamp shines down and to the extreme right. Moving the adjustment screws just doesn't work. Is there a gear stripped or what?? yep, that would be it. The adjustment ...
...halogen headlights on bmw z4 how to adjust halogen loe beam headlights on bmw z4 The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp ...
Needing instructions for the removal of drivers side door panel on 2004 BMW Z4. There are two screws that need to be removed from the front door panel as well as the clips--the screw under the little ...
how can i change (replace) a 2004 Z4? how can i change (replace) a gear knob of a 2004 Z4? Thank you. I said last time, pull upward with great force! Holds a lot, but no screws! Warning! pulling the ...
engine running hot Could be: Thermostat Antifreeze ratio wrong water pump radiator head gasket cylinder head
coolant disappears, no visual leaks, temperature seems ok. Have your cooling system pressure tested. You might check for coolant in your oil, possible seepage of head gaskets. You don't see steam or ...
Expansion tank overheating, have had the water pump, thermostat, radiator changed, now smoke is appearing from the engine and there is residue apparent aswell. Does this sound like a head gasket ...
Glove box sagging Can anyone tell me how I can fix my glove box? A friend opened it and although still attached, it sags when open. HINGE SCREWS AND BRACKET BAD Also check is the holes are not ...
changing a car battery problems with changing the battery Follow this procedure exactly1Place the Z4 in park and turn the engine off. Allow it to cool for a half hour.2Open the trunk. Pull up the ...
Usually answered in minutes!
147 Questions
95 Questions
46 Questions
34 Questions
29 Questions