Questions & Answers for: screw heads Cars & Trucks

Ad

...I need to know how to or what tool is needed to remove the inside panel to get at the mounting screws to replace the mirror. tools: philip head screw driver, flat head screw driver metric socket ...

Ad

03 Kia Rio- can not get retaining screws off rotor...screws now stripped hi from uk the retain screws are for holding the rotor/disc in position so when wheel bolts are removed they can be easily ...

Ad

...in france YES. You can adjust the head lamps as per your requirements. Look for the mounting screws on back side of the head lamps. One screw with philips head will be able to adjustable for ...

...screw head I have used a many 4" phillip screws in boarding up a window. I have about 16 4" screws in the 4x8 plywood. I want to core out the heads of the screws so no one can remove the ...

Question about 2001 Grand Cherokee

1 Answer

remove stripped screw head Put wheel on wrong side of new snow scoop. Screw head stripped, screw goes through plastic wheel then washer and nut. Can't hold screw to get bolt off. Need way to ...

Question about 1994 Caravan

1 Answer

how can i remove a rusty screw in the head lights depending how bad the head is on it if it is a star head get a Philips screw driver tap it down on screw with hammer just to shock it spray some WD40 ...

... I have changed my number plates and need to remove the old number plates Normally these are simply screwed to the vehicle bodywork with either 2 or 4 screws. It is just a matter of locating the ...

How do I remove housing to get to the ignition switch on a 2007 Pontaic Torrent Isn't it a steering column cover? These are usually or almost always held with screws that are recessed in deep holes in

removing steering column shroud on a 2006 sierra 3500, no screws where videos show to remove them there's a recess area but no screws in the locations indicated Steering Column Trim Cover Replacement ...

Stripped screw on the valve cover. The screw threads are OK it is where the screw screws into the cylinder head. How can I repair this without taking the head off and bringing it to a machine shop? ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...