...is the I want to drain rad on 03 gmc sonoma ,How is the drain plug opened,it does not seem to be screw type As you are turning left, pull on the plug, use pliers. it should pull out maybe 1/4
...black trim/sound insulating cover under the passenger side of the dash - there are three 7mm-headed screws. If you can't find all the screws and can't pull the cover out of the way, don't force it. I ...
i have a 2001 jimmy with a bad heATER CORE . THE BOOK SAYS ALL SCREWS TO REmove ventalation box r on the inside ??? any help Yup,----this is no joke, You going to have a headache over this job ...
...to remove wiper arm 91 gmc sonoma On the base of the wiper arm there is a lever,using a flat head screw driver pry it outward,then use screw driver to pry on opposite side of where the arm joins
...located on a 2001 GMC JIMMY 2WD? Both front wheels look for wire coming out of center.Either screw on to backing plate with allen head screw or are riveted.Look for wires out of rear wheels
how do you remove the steering column shroud off of a 2003 GMC sonoma SLS with tilt wheel? Look under the cover you will see holes inside the holes are screws remove the screws and the cover comes off
...the air dryer? Most of the time there is not a body nut on them,there is a threaded hole for the screw.You can get a sheet metal screw with a hex head and use it
my 2002 envoy has only one light alignment screw is ths the way it is or am I missing something? this is how it comes it should push the head light in or out depending on which way you turn the screw
how to adjust head lights 2013 gmc. sierra 1500 ? what do i do to adjust head lights ? There is two screws ,one is up and second left and right.look around the light.
Question about 2006 Sierra 3500
removing steering column shroud on a 2006 sierra 3500, no screws where videos show to remove them there's a recess area but no screws in the locations indicated Steering Column Trim Cover Replacement ...
Usually answered in minutes!
Step 2: Please assign your manual to a product: