Questions & Answers for: Eureka screw heads

My Vacuum Will Not Turn On or Off Does anyone know the exact tool to use to remove the front cover on the vacuum in order to replace the wiring connected to the on and off switch? You will need a Torx

My Vacuum Will NOt Turn On and Off Okay I hope this clarifies things. I plugged in my vacuum cleaner and tried to turn on the unit. However, the on/off switch connector did not connect. I tried to ...

I need help changing belt on my Eureka Optima I's like to know what I'm doing before I start taking screws out and making a big mess! If you're not familiar with how the vacuum is put together, taking

Need to replace belt on Eureka Powerline 12.0 vac. Screws look like Torx head or something on bottom of vac. Are those the screws that need to come out for changing? If so, what size do I need? No, do

how to put on a belt on eureka uno bagless vacuum cleaner how do i take the cover off to replace the belt Unplug the vacuum. Turn it over so you have access to the bottom of the unit (you should see ...

location of belt can't find how to get to and replace belt on eureka whirwind model #4388 There are two Phillips head screws on the cover over the power head. This is the cover that fits around the ...

...for plate removal... Thanks jim nash [email protected] Hi Jim You should find the cross head screws on top of the hood - look below the duster and there should be a screw there, also another ...

no suction power on my eureka boss vacuum (vacuum bag has been changed)? Most probably a clog in the neck. This is where the power head connects to the body of the machine. Remove the base plate ...

...there are two) to either end attach them to the tension prongs clip the brush head in place them screw the retaining plate back hope this ...

My vac is Eureka Boss Super Lite 402A Problem is how to disassemble the head to clean it. There should be four screws on the bottom that will allow you to take the hood off for cleaning. If the hood ...