Questions & Answers for: screen goes red shut down

...goes on flashing power light) then splash screen appears, (lamp has only 184 hours) and then displays input (I'm running a DVD) player, then the red tempurature light goes (while the lamp remains ...

screen changes colors You can have the TV on all day or for five minutes and it will change to a bluish, sometimes red color and the shut down. Sounds like your tubes might be going. Very expensive to

screen goes dim. Is the red projection gun gone out or is this a high voltage problem and can this be fixed? Thanks, DB ... Bryan, Tx. The adjsutment that you turned down was the G2 voltage to the red

screen. When I pull the fuse for the 185vdc on the driver board, power will stay on. LED goes to blue. When fuse is back in, it will shutdown after a few second delay, I noticed that the voltage would

...goes into standby mode by itself. It did this a few times a row so we just shut it off. Adjust RED screen drive down, or disconnect,unplug CRT board from red tube turn set back on if it plays without ...

...screen goes completely red and no sound Hi, This is symptom of defective red picture tube in TV that needs to be replaced. Let me know if you want to replace it by yourself to provide you part number ...

...square looking box with adjustment knobs. Look for red screen adj and slowly turn rt or lft until lines just disappear. If screen goes too bright tv will shut down, just turn back on again and ...

screen goes all blue or red then shuts down flickers all blue or red then shuts down Please look here on the site under tips---you will find my post there for this problem--these sets had problems ...

...goes to a full screen red while giving an electrical "cracking" sound before shutting down. Once shut down, the red power light blinks 8 times in a cycle. Any thoughts? I have unplugged and ...

...screen tries to light up with the picture but it is flickering and then it goes in and out before shutting down completely. Do I need to replace the battery already, check a connection inside it or ...