Questions & Answers for: screen flashes c 31 22

screen and in the top right corner where the tape counter is it flashes a C:31:22 and will not record at all. The tape is new and the battery is charged. the reel sensor is the problem of your camera.

...31:22 and arrow pointing up on screen some times it works ok until i rewind the tape Here is the only solution: CODE C:31:22 Symptom/State T reel fault CODE C:31:22 Symptom/State S reel fault ...

screen flashes "reinsert cassette". So I guess the camera has a problem recognizing the tape. What might be wrong? Reinsert the cassette appears on screen when I close the holder Turn the unit off and

...SCREEN THERE IS A C:31:23 CODE FLASHING ON THE SCREEN AND WHAT LOOKS LIKE A EJECT SIGN FLASHING ON SCREEN I get the same code and icon flashing. as others have mentioned. My first instinct was to ...

...Screen is flashing C:31:22 i did what a couple of people on this site did...i took the battery out and then back in...next, i ejected the tape and put it back...then it worked again...try it...it ...

...on screen unless moisture in lens Eject tape let sit 1 hour or more to acclimate 31...manual says to eject cassete and reinsert, operate OR daisconnectpower cord andremove battery, reconnect,

31 ecently my sony camocorder keeps flashing the code C31:22 and a little arrow in the middle of the screen. It stops only after i remove tape from the camera. Please advice The camcorder has detected

flashes the following fault codes: C:31:40, C:31:22 and C:31:23. I have repeatedly removed the tape and the battery in an attempt to clear this. It will run for a few seconds and then shuts down again

...screen and the message C:31:22 in the upper right hand corner AND the camera will not operate. Anyone got any ideas what this is about? C:31:22 is stand for Take up Reel not functioning.It might be ...

what does it mean when it flashes c:31:22 on the main screen, C:31:22T reel fault. Load the tape again, and perform operations from the beginning.