...Flyback transformers usually have 2 adjustable rods - 1 is for focus the other is for screen (G2) voltage. try turning Clockwise the Screen adjust with brightness-contrast at max. Till you see white ...
...screen adjustment a touch? Screen and focus adjustments are integrated into the flyback transformer. Take the back off the set and you should see the two little knobs on the transformer. A little ...
...with the key board. If the brightness control on the monitor is not working. It may due the defect of screen control on the flyback transformer. You have to replace the flyback transformer
Question about Flatron F700P 17" CRT Monitor
...screen" adjustment on it, but you DO NOT want to turn that one. You would have to open the tv, and take an INSULATED TOOL and turn the little adjustment labeled FOCUS or F on the flyback transformer, ...
Question about SyncMaster 152 B 15" LCD Monitor
...adjustment doesnt solve problem. any fix or is monitor buggered? Yes, there is one solution. Open the monitor case, then see for Flyback transformer ( with cable attached to the CRT Tube with rubber ...
Question about SyncMaster 152 B 15" LCD Monitor
...market screen or A1 shoud be beteen 350/500 volts when making adjustment remember to take into account current taken by meter If voaltage will not adjust flyback transformer will have to ...
Question about HLR5667W 56" Rear Projection HDTV
...and monitor if g2 response, some model if vertical ckt down monitor have black signal only can determine if screen adjustment knob in flyback transformer turn increase. vertical line
adjust from back). There will be two potentiometers on the back of the flyback. Top one is screen, bottom one is focus. Put a mirror in front of tv and adjust the focus potentiometer
Question about 32A43 32" TV
...screen with no pitcure, is that the flyback transformer? No, the set is prone among other things to issues with the three picture tubes, go to unused video input----screen should be black with only ...
...screwdriver you can turn the focus adjustment knob on the transformer. Do not adjust the screen control knob. If the focus does not clean up, then the tube is probably worn or the flyback is
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions