Questions & Answers for: scratches on stainless

stainless steel refrigerator with a bad scratch What would you recommend to repair a scratch to a stainless steel bottom freezer refrigerator door? Thanks in advance Check out this site and see if it ...

...scratches on our sink were surface but very noticeable. Hope this helps. Try contacting Prime Time Solutions 1-800-333-9525. They have products for all sorts of problems with stainless steel sinks. I ...

...STAINLESS, AND THE SCRATCHES ARE REALLY BAD, YOU COULD TRY SOME STEEL WOOL TO SOFTEN THE SCRATCHES, BUT IT WILL BE A TRADE OFF OF MINIMIZING THE SCRATCHES AND CAUSING A SMEARED LOOK TO THE BRUSHED ...

...stainless steel sink WILL scratch with use. However, over time as the sink ages, scratches will become less apparent and in fact blend into the surface. Minor scratches on the inside surfaces of the ...

scratched stainless steel I scratched the stainless steel on the front. How do I repair it? Hi Try www,finishing.com/4000-4199/4148.html I do not know if this will be helpfull, but give it a go

...scratches on the surface. discolored stainless above the oven vent, tried to clean with cleaner supplied but while cleaning it seemed to have removed a slight finish which now sticks out much worse ...

I have a stainless steel fridedare and I scratched it with a brillo type sponge- anything I can use to lessen the damage? not really.... once you scratch it your pretty much scratched., there are some

...scratches from stainless steel appliances Try this at your own risk. Step 1 Consider using a product made for stainless steel such as Scratch-B-Gone or Bar Keepers Friend (see Tips). Step 2 Or, try ...

scratches of the stainless steel door? I washed the door around the handle of fridge with sponge only and yet * I managed to make fine, but visible scratches. Is there a way to have those scratches to

...scratches on front of stainless steel. How do I repair? I see there are repair kits but have to be sure there is no protective coating on the stainless. Is there and if so then what do I do to repair ...