Picking up the bobbin thread My machine suddenly started skipping stitches and now refuses to pick up thread from the bobbin. I've changed threads, bobbins and needles. I've thoroughly cleaned the ...
I have a viking Iris sewing and embroidery machine and the bobbin thread is bunching up underneath so then the thread breaks When I had that happen, it turned out that I had not wound the bobbin ...
scratched bobbin case. Before you do anything else, I'd remove the bobbin case, clean it and the area around it thoroughly (and check it for scratches or dings -- perhaps a needle broke recently?) and
bobbin case pops out my bobbin case pops out when I am sewing there are no scratches on it though Are you sure it is the correct bobbin case ? If it is check the spindle it slides onto and make sure ...
when i start to sew, my thread gets caught up on bobbin. the string gets wrapped around the bobbin then breaks the thread. it seems as though the bobbin is sitting a hair too high. ? ? ? Make sure ...
Question about XR9000 Sewing Machine
the bobbin jams up after three or four strokes of the needle every time the needle starts moving the bobbin jams up You possibly have the incorrect bobbin type, or there might be scratches on the ...
Question about XR9000 Sewing Machine
Thread keeps winding around my bobbin holder. What could I be doing wrong? Misthreading, most likely. Take all the thread off and out of the machine and clean the machine, especially around the feed ...
Question about XR9000 Sewing Machine
why is my bobbin thread jamming on viking juliet sewing machine viking juliet bobbin thread is jamming on fabric Be sure to clean out any stray fibers or threads in the bobbin area. Make sure the ...
Question about XR9000 Sewing Machine
how do i fix the problem of my top thread tangling up and moving the bobbin case? the top thread wraps around the lever on the bobbin case and the bobbin case moves eventually. Singer 7258.CL Remove ...
Question about XR9000 Sewing Machine
...bobbin in. Also, bobbins wear out, and can be warped or scratched when you break a needle, so trying a few different bobbins can often fix the problem. Try a drop of oil on the post inside the bobbin ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions