Questions & Answers for: schlage deadbolt installed

...schlage keyed deadbolt? There do not appear to be mounting screws on either side of the deadbolt housing. There should be two hole plugs on the face of the interior deadbolt housing, above the key ...

...schlage deadbolt that is doubled How do remove a schlage deadbolt that is doubled keyed and has no screws. Where the screws would normally be is what appears to be two pins with no way to remove You ...

How do you reset a code on a Schlage Keyless Lock? here's a link to the installation instructions, which includes programming instructions: http://consumer.schlage.com/Project%20Documents/P515-858.pdf

Schlage Keypad Lock or Keypad Deadbolt need to be reprogrammed after changing the battery? The Schlage Keypad Lock and Keypad Deadbolt does not need to be reprogrammed after replacing the battery. All

...Schlage (button) does not rotate deadbolt" The solution is to push the PC button, then the Schlage button, then 7 to enable the turn lock feature. Here is the contact info you need for customer ...

...Schlage BE365-CAM BE365CAM505 have a feature that allows it to automatically lock the deadbolt without having to enter code and turn the dial? Sort of. The lock has what is called the "turnlock" ...

...Schlage button unlocks the deadbolt, your installation was done improperly. The cam on the base plate must be vertical and the bolt must be correctly installed. You will always be able to lock and ...

...schlage be365 ply716 keypad deadbolt Here's a link to the Schlage website area that allows you to download user manuals: ...

...Schlage deadbolt. If I lock it from the outside (using the key) it locks fine, but I can't remove the key without unlocking it. Now What? The deadbolt only installs one way, no chance to get one side ...

...Schlage will not lock. It lights green but the deadbolt doesn't extend. The thumbturn just spins around. This was installed by the contractor installing our doors. I also tried the Enable or Disable ...