Questions & Answers for: scanner scanning dark enough

...The negatives and the original prints are excellent. I suspect there is not enough light when scanning. Epson Perfection 3200 Photo scanner are you using the a transparency adapter on the

scanner light bar assembly.  Just clean the glass.10.  Push the top back down. (Engage the two clips on the back side first).11.  Replace and tighten the five T10 torx screws.  Don

...scanning some rather dark negatives and the scanner incorrectly reads the frame position. it seems to only want to scan in between my frames. Is there a way to tell the scanner where one frame ends ...

scanner developed a thin green line down the left and a broader yellow line down the right; they both increased in width until I was left with a space only large enough to scan a postcard. I would let

...scanner during last tax season, so it should not be having a problem! Love it, but this is a new issue. How to get the image scanned far enough to the right so the left side shows? The plastic guides ...

dark color. Sometimes this means there is an oil leak. Sounds as if the ignition module may be failing. Here's my experience of the week:Customer brought in a 2002 Chevy 1500 series truck with the 5.3

...scanning too dark, even though I've tried manual and auto exposure and played with all the settings I could find. It used to work beautifully. I use Monaco EZ Color to calibrate my monitor, scanner, ...

...scanner is going bad that would could cause light copies from copy's and scan to emails, but normal prints and recieved faxes would still be nice and dark. Eventually it would just stop having ...

dark. Any ideas on what's wrong and if it's fixable? It's a pretty good scanner (I think). (I chose the model 'cxi' in the list, but I think it's just 4570C). Not worth fixing. The bulb is wearing out

...dark with out running diagnostics myself but here it goes, I had a 1988 Cavalier that would just die while I was driving it. On short drives, in the morning, when the engine was cool... it would not ...