...scan head locking switch I moved my AL 1655CS printer to a new location and new it advises that I have an L1-00 system error. It is described as a locked scan head locking switch. Where is it and how ...
Scan head mechanism failed. Remove flat bed glass, take out scan head unit, verify any breakage in mechanism gear pinion,if found replace gear mechanism, if no breakage found replace scan head driving
while scanning a dark shadow vertically appearing on the image, please advice the solution. might be dust on scanning head which glow light when scanning is on the scanning head may be clean by wiping
Question about PSC 1215 All-In-One InkJet Printer
scan head movement while copying/scanning..if its not moving check scan head gear assm any breakage? replace it. If its moving properly and giving blank image scan head faulty(which is moving forward
Question about LaserJet M1005 Printer
...Scan head mechanism failed. Remove flat bed glass, take out scan head unit, verify any breakage in mechanism gear pinion,if found replace gear mechanism, if no breakage found replace scan head ...
...Scan head mechanism(while scanning or copying there is a part called scan head moves right to left with light fails to move due to mechanism breakage). For reaching this unit you need to remove flat ...
...Scan head mechanism(while scanning or copying there is a part called scan head moves right to left with light fails to move due to mechanism breakage). For reaching this unit you need to ...
Question about LaserJet 3050 All-In-One Printer
...Scan head..70%Scan head cable...25%Formatter...5% For tech guys only: Remove ADF unit from the printer, remove both side covers of adf, remove & replace scan head, check...Replace scan ...
Scan head mechanism failed. Remove flat bed glass, take out scan head unit, verify any breakage in mechanism gear pinion,if found replace gear mechanism, if no breakage found replace scan head driving
Question about Bizhub C284 Color Copier / Printer / Scanner
...prints look fine. Static on CCD chip? If not in the direction of the paper feed then in the direction of the scan head. Dirt on the scan head or bad scan head or scan head connection. Send it
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions