Question about DesignJet 1050c plus InkJet Printer
scan-axis motor assembly. - Replace the paper-axis motor assembly. - Replace the service station assembly. - Replace the main pca. - Replace the ISS pca. - Replace the power supply unit. - Replace the
...Scan Axis Starwheel diagnostic test,Entering in Service menu: hold the Up arrow key and the OK key down andswitch the printer ON using the front power switch. Wait until the LED of thepower ...
...axis; Power and scan key at same time, unit then will tip from Y1 to Y2, then recenter. use up and down arrows to bring laser into adjustment. Let unit stabilize for 30 seconds, press scan key, you ...
scan error starwheel axis power off your printer, open your printer's left side, disassembly starwheel axis motor, clean the gears, re-plug all parts (if any part does not broken) , press up and enter
...scan axis measure error. 4 Check that the Scan-Axis Motor is correctly connected. 5 Check that the Encoder Sensor is correctly connected. 6 Remove the Encoder Strip and clean it. 7 Perform the Scan ...
...Scan Axis or Homing Scan Axis.: it is not uncommon to find that the encoder is the fault behind the error code, in the User manual there is a procedure for Cleaning The Encoder Strip. you should ...
...9000s system error The Paper-Axis or the Scan-Axis Motor moves the Carriage, but the input from the Linear Encoder Sensor does not change. You are going to need a tech to check out the
Scan-Axis reference is incorrect. Corrective Action: Try the following: Manually recover the Printheads and check whether the error still appears. If the error does appear again, then check that there
...scan axis motor, carriage pca, encoder strip, encoder sensor, trailing cable, mainboard, hard disk, interconnect pca, printmech pca, sausalito pca, ink supply tubes. Nothing works... When i do the ...
...scan axis motor, carriage pca, encoder strip, encoder sensor, trailing cable, mainboard, hard disk, interconnect pca, printmech pca, sausalito pca, ink supply tubes. Nothing works... When i do the ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions