Questions & Answers for: sb 600 reset

...SB-600 Display flashing. Hi all. I have a problem with the LCD display constantly flashing on my SB-600. It has been doing this for months. It seems to work OK, but is annoying. Any Ideas? Thanks ...

SB 600 Not resetting... I've tried the ol' pushing the MODE/ON/OFF buttons for several seconds and taking out the batteries while the SB 600 is on... is there any other way to reset this thing?? my sb

SB-600 will never be on ready My sb-600 seems to work fine, the lcd is on and I can change setting etc but the READY light never comes on, I have reset the unit and also tried fresh batteries, nothing

SB-600 FV Lock doesn't work anymore Hi, I'm new to this board and was hoping someone can help me figure this problem out. I have a SB-600 and Nikon D80. I set the FV Lock as the functional button, and

...SB 600 flash. The moment I insert the batteries, the flash starts firing in a periodic manner with an interval of say 30 secs. I tried resetting the flash but to no avail. This happens without the ...

SB-600 keeps firing My Nikon Speedlight SB-600 keeps firing on its own, whether on or off the camera. Tried replacing the battery and resetting. When I turn it on it just keeps recycling and flashing.

SB-600 display shows, but will not fire or test fire Same as above, my SB-600 turns on, but does not fire or test fire, does not make the charging hum. there's a part in inside that triggers the light

sb-600 flash. It works fine but it has I have a sb-600 flash. It works fine but it has recently started making a popping sound and the flash goes off by itself sporadically. When it does that it takes

...SB-600? Hi, To reset your Nikon Speedlight SB-600 you need to press Mode + ON/OFF, both buttons simultaneously for approximately 2 seconds to reset all settings, including the custom settings (except ...

sb-600 flash tube. before that, zoom works perfectly. now when i try to place it the batterys the zoom is going at 24mm and than stuck there and the flash won't turn hey! I've just replace