Questions & Answers for: saw chain wore

...saw was very difficult to slide up/down, but after attaching the shims to the motor guide with some silicone, they don't slide around anymore. I also used a dry lube (bike chain teflon) to help the ...

Ad

...chain inside wore out and "flys" away from the gear , sawing a hole in the case. The unit needs to be rebuilt and the case either replaced or welded. You would need a transmission shop to verify if ...

Ad

Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin

1 Answer

...wore the first one out. The second one is a lemon. The pully keeps coming of the reel. There is no pully guide and the hole is too large for the rope. I am so frustrated with this one. I keep fixing ...

Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin

2 Answers

...chain saw. Runs fine but the clutch slips and it will not power the chain. What is the problem? The clutch face may be worn away Clutch components are on the "General Assembly" illustration; items 8 ...

Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin

1 Answer

the chain break for broken chain brake parts such as the spring. If all appears intact clean away saw dust, sticks or other debris. Otherwise, the chain break may be simply wore out and need replacing

Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin

1 Answer

...saw, let the chain rotate around the bar and adjust the tension on the chair accordingly. Also, overtime chains do stretch and no matter how much you tension them they will still be loose. You can ...

Question about Forest & Garden No.967012396 345 16" Gas Chain Saw

2 Answers

...saw with the bar off to see if oil is coming out ok.If not your screen inside the oil tank might be plugged up. It sounds like the chain is not getting lubricated causing it to lock up. Make sure the ...

Question about Forest & Garden No.967012396 345 16" Gas Chain Saw

1 Answer

chain saw chaps. I’ve used the WoodlandPro chaps, but the wore out in 3 month. Has anyone had any experience with Tecomec Chaps? I’m on a tight budget and I can’t afford Kevlar. I found it here: http:

Question about (16") 3.5 HP Electric Chain Saw - WG303

1 Answer

...chain stops but the motor is still going is a clutch? If so how do I fix it I have not worked on electric chainsaws but I do work on gas powered saws. The clutch shoes could be wore out if the saw ...

Poulan Pro chainsaw,46cc,the chain adjuster keeps loosening up while running, need a new adjuster/tightener? as you run the saw the chain always stretches and will until it is wore out .

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Saws Experts

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39381 Answers

Are you a Saws Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...