Question about P4M800-M7A Motherboard
...SATA RaiD Mirror Array As C boot Disk I installed 2 sata Hard Disks as a RAID Mirror Array and want to have this as mu c drive boot disk. I have other ATA disks in the computer as well. The Bios does ...
sata raid config I have sata 1-2-3-4 set up as raid and would like to install a HD DVD blue-ray drive but will not find same....tried in sata 5-6&7 but still won't work How can I overcome this? have ...
...SATA RAID) and we have set the drives to various configurations -- BIOS contoll, PIO, and DMA. It appears you have made an error with the RAID configuration. RAID 1 is mirroring and requires an EVEN ...
...sata set to raid, i want to know if i plug the raided drives back in and leave the sata config on ide enhanced if it will destroy the OS on the raided drives. (booting up on the single drive not the ...
...Sata is a Raid 5. Updated drivers Bios etc. A stab in the dark. Sound like the MB BIOS expects and is written to have the OS on the IDE slot. After that I would add one SATA drive at a time to see if ...
Question about 848P-A Motherboard
sata raid driver the right driver for a single sata hd I have enabled the bios for a sata hard drive. i downloaded a sata RAID driver for this motherboard. is this the correct driver for a single sata
sata raid and normal mode? questa scheda madre supporta il normal mode delle periferiche sata o solo raid? this motherboard support the normal mode of peripheral device sata or only raid? PS: i don't ...
Question about eServer xSeries 206
...sata raid. It also has 3 hot pluggable scsi slots. When the sata drives are not connected it boots off the scsi to win server. As soon as the satas are plug in ( 1 or 2, raid or not) it wants to boot ...
Question about S875WP1-E Server Board Motherboard
...the non RAID sata ports on the motherboard. I think when you disable raid you also disable the raid ports. You should have another set of sata ports on the motherboard, probably a different
sata raid controller that comes standar with the ml150 g5. Enabling SATA RAID functionality in the BIOS Setup Utility: 1.Boot the server, and then press F10 to enter the ROM-Based Setup Utility (RBSU)
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions