...projector, then it is more than likely that the blue polarizing filter is burnt-out. I don't know where you can get replacements - I would like to get one myself for an aging Sanyo PLC-5605B. Do you ...
Sanyo PLC-SW30 Projector is ceiling mounted projecting onto an interactive whiteboard. Recently the projected image developed a yellow tone. I have replaced the lamp & cleaned the lens and all the ...
...Sanyo TV that has like what we would describe as a ghost or double image on the screen. Any ideas? Email: [email protected] You will have to replace both the convergence IC's on ...
...yellow you see is all dust on the mirrrors inside your projector. If u are lucky you can get the mirrors cleaned by a pro, if you are unlycky as i was, the blue mirror has burn and u need to replace ...
Question about PLC-SW30 Multimedia Projector
...sanyo plc sw30 projector Hi, I have bought a second hand plc sw30 projector and am having trouble getting my photos up on the screen. I have attached the usb lead and scart (?) lead and I have my ...
Question about PLC XU35 Multimedia Projector
...image has yellow ghost to the left and a blue one to the right. 2 things this could be: The LCD panel is blown because of incorrect shutting down - not letting the fan cool the unit - there is no fix ...
yellow circle in the middle of the image The Blue LCD has burnt due to either an old lamp or poor ventilation/blocked filters. There is no cure for this except a replacement blue LCD panel is required
Sanyo projector and they are $93.00. You may have to disconnect the ribbon cable to get to it as well. Be careful with the cable as well because it is very thin and delicate as well and if you tear it
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions