...leads to 1 conclusion: the device is packed with tons of dust it has a safty powerdown on heatup http://www.fixya.com/user-guide/p196016,m4858,gm38/Sanyo-PLC-XP41-Multimedia-Projector.aspx good ...
Question about PLC-XF46N LCD Projector
Sanyo PLC-XF46N projector shuts down before powering up completely My Sanyo PLC-XF46N won't turn on completely before shutting down & flashing "warning temp" light; it can't be too hot - the lamps ...
Sanyo PLC SW20AR - Shuts itself down Basically, my projector has started powering itself down a split second after it completes its startup countdown. Makes it the full 30 second countdown, displays ...
...starts.Green lamp stays on.Two seconds later everything goes off.Stays dead until main switch off for five seconds.Then repeats. Have you checked the filters? I have a Sanyo PLV-75 and had a similar ...
Question about PLC SW15 Multimedia Projector
PLC-SW15 projector starts then shuts itself off after 2-3 minutes. After 3 or 4 tries it keeps going! Try cleaning out the air filters. This helped us with the same problem.
...Sanyo PLC-XP46 the projector starts up and immediately shuts down. Lamp counter was reset. Check the iris door, it opens and closes freely. If dust has clogged it up, it will not stay on. Also check ...
Sanyo plc-xt16 Projector After the projector is turned on and the countdown finishes on initial start up the projector shuts itself off within 5 seconds. The fan runs for 1 minute and then the ...
Question about PLC SU20N Multimedia Projector
...Sanyo plc su20n comes on but shutts off after a couple of minutes. Does not give a temp warning just ready indicator goes of and picture goes off. IF you wait a couple of minutes the ready light will ...
sanyo pro xtrax projector the "lamp" LED turns red when plugged in and the ready light turns green. when the power button is pressed, the bulb projects the blue start-up screen then shuts off and the ...
Question about Xga 4500 Ansi Projector
sanyo projector i change the bulb but it wont start up the bulb how to reset? i replace the bulb but it wont start up the bulb. the warning indicator and power indicator blinks ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions