...sanyo Pro Extax multiverse projector from inside the one of the menu options. i clicked on the remote code option (from code one to code two) and it froze up. cant do anything with it. wouldnt even ...
red and projector is not focusing the after repeating so many times problem is same if the lamp goes out after the red led goes on, there is a fan issue and the projector is overheating or the ballast
Question about PLC XU35 Multimedia Projector
...product, to others, but thanks anyway... Multimedia Projector SANYO PLC-XW55A each time on only about 2-3 minutes off his own red power light blinks. after it cools in on the same thing happen
...red light is flashing, then when the light is fixed, I push on the main button, the light turn on green. Then the main lamp start for au few seconds then stop and the green light, start to blink red ...
...red blinks very 2 seconds indicates temperature error. for this let the projector cool off check filters and fans that there is no blockage of air for proper cool down 3 red blinks every every 2 ...
Question about Projector Lamp for PLC-XU70
...Sanyo plc xu70 projector lamp is brand new after replacing it still has the same prolem.when I turn it on the power light gets green for seconds then red blinks then it stops..what do you think the ...
projector turns on but no limage on red light comes on then green light tyhen goes back to red but still no picture These blinks [flashes] are fault indication (Error Codes). From the number of blinks
Question about PDG-DSU20 Bulb/Lamp
sanyo projector model pdg-dsu20e the lamp turns off within ten minutes. the lamp turns off after a few minute and the red temperature light starts to blink. These blinks [flashes] are fault indication
Question about PDG-DSU20 Bulb/Lamp
...Sanyo PLC-XU51 projector power light blink red? When I turn on the projector the power light is green and the fans kick on. After a few seconds the power light flashes red and the fans get louder. ...
red light blinking... These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions