Questions & Answers for: sanyo dp50747 power supply board

...Sanyo DP50747 50 inch plasma. When I pause the tv, then push play (even 1 minute or less) the sound does not start as soon as the picture starts back. I have picture first and no sound for 4 or 5 ...

...Sanyo DP50747 went dead. It appears to be the power board. The board on my TV is the one made by Samsung LJ44-00132B. No one has this board. Any help would be appriciated. I would suggest to visit ...

...sanyo 50" hdtv, It wont power on, I'm working on a sanyo 50" hdtv, It wont power on, I replaced 6 capacitors in the power supply and replaced the logic board on it, but when i hit power, all i ...

Sanyo DP50747.. a friend of mine, who repairs electronics has looked at it and said that the power supply needs to be replaced. I was wondering if there's any way to repair a power supply? OR if there

...Sanyo DP50747 (May 2007) it has worked perfectly fine for 4 yrs and then one day while on it shut off and will not power back on. No light - no nothing - as if it is unplugged. Any ideas? I am afraid ...

...sanyo dp50747 Too many things can be wrong to begin discussing. The power outage more than likely caused a power surge and you have burnt up one or more of the circuit boards in the set. This will ...

...sanyo 50" plasma tv (dp50747) have replaced every board in the tv except the bottom buffer boards and the sub power supply where the AC cord pluggs in.the problem is that the tv still will not ...

sanyo tv The fuse should be located on the power supply board. You'll have to remove the back cover to access it. I posted a link of what the board should look like. http://www.shopjimmy.com/vizio

sanyo dp50747 powers on but no picture or sound tv power light comes on, and the little green light one the pwer supply comes on but no sound or video what should i replace to get this working and ...

...Sanyo DP50747. The screen just went black. I think it should be something fairly simple I just need to figure out what parts i need. Any help would be great Could be the main board, power board or ...