Questions & Answers for: samsung washer control board reset

Samsung/korea-SW905Washer.When power is switched on the Fault-'1E' appears. what could be the reason.( narrate list of control component failure). Bought in the year 1996 at India ( voltas mega washer

Samsung told them they couldn't use this washer in places where the temperature got below 60 degrees because it's temperature sensitive, somehow. But the overwhelming reports on this model are good. I

how to reset a samsung dv328aer unplug the A/C line cord and wait 1 minute. Then plug it in again. If, the problem continues, your washer needs a new control board.

...samsung washer it still shows nd and stops The problem is probably in the control panel or water level switch. I just posted a procedure to clean the relay contacts for the pump motor relay. This ...

...Samsung Washer Error Code: 1. Unplug The Washing Machine: Unplug the washer for 2-3 minutes. If the fault is displayed because of an electronic glitch, or communication issue, unplugging the washer ...

...Samsung washer will not start, be sure the Delay Start function has not been activated. When the Delay Start is in use the display will show a number followed by an H (1H, 2H, 3H). The Delay Start ...

Samsung washer WF520AB with non-working lcd display. All machine functions work. A machine reset delivers one complete cycle with display working perfectly. The next cycle the display is dead again. ...

Samsung top load WA54M8750AV/A4 Lid locked won't power on fully Full load of clothes but washer has no display or lights, I checked power outlet works fine. I press power button and after about a ...

Samsung vrt washer has no power Plug it in. Does it have a reset button? Check the fuse. if voltage to control board then bad control board

...Samsung washers come with a child lock safety feature. If the child lock is engaged, it prevents accidental start of the wash cycle. Check if the child lock is activated. If so, disable it and try ...