Samsung 42" Plasma spn-4235 Went black When watching TV the screen went black never to return again. The red light flashes 5 times when first powered on. Any idea what might have went wrong? Thanks, ...
samsung spn 4235 I have the same problem as everybody else. My tv, went black after flashing red, 5 times. You have mentioned the probable cause as ,"y-sus board." I have called around and NOBODY ...
inch plasma The most likely thing i have found is to replace the Plasma panel , which is expensive, or u can try replacing the x-sus printed circuit board or the y-sus printed circuit board. Good Luck
Question about LN-S4051D 40 in. LCD Television
SAMSUNG PS42Q96HD PLASMA ,16 MONTHS OLD, RED LIGHT COMES ON WHEN STARTED UP BY PUSHING IN THE ON BUTTON, AND BEFORE A NANO SECOND IT THEN TURNS ITSELF OFF, ANY IDEAS PLEASE ANYBODY ???? Could be power
Question about LN-S4051D 40 in. LCD Television
...the panel that will give you the exact voltage . if you have it on the y-sus check to make shure you have your va on the x-sus but with it being a samsung its just going to be the y-sus board good ...
Question about LN-S4051D 40 in. LCD Television
Samsung ps42p3s plasma tv no picture audio ok please tell me what i can do or tell me what part i can change According your description, check fuse of Y SUS board, if not Ok, change it; also check Z ...
Samsung HPT5054 no video only audio On the board next to the y-sus - that is the board that the y-sus plugs into there is a blown cap- mostly the 680uf 25v 105c cap is the one that goes on that board
...screen cracked Or strip it out and sell the internal boards. X-Sus, Y-Sus, Power Supply, Video Processor board etc. Better value as parts rather than as a TV facing a hefty bill for a broken
Question about HPT5054 50 in. HD-Ready Plasma Television
...sus boards are disconnected. How can I determine which board is bad Samsung model PN50C590G4FXZA April 2010. Original symptom was that it took several minutes up to 20min before screen presented a ...
Question about HPT5054 50 in. HD-Ready Plasma Television
...Samsung PN50C450B1DXZA that I have replaced the Y buffer and main on and I still have no picture. The logic board blinks as it should, once every second. The P at the beginning denotes a plasma TV. ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions