Questions & Answers for: samsung led tv flashes colors

...Samsung HLN4365W DLP projection TV since Jan 2005. When turned on, the Lamp LED (the middle LED on the front pannel) flashes for about 10 seconds then shuts off. All LEDs are off (nothing flashes). ...

...Samsung HLR5667W Turn it on--it responds to the remote--timer LED flashes once followed by lamp LED flashing a number of times then nothing. I can hear the motor start up (color wheel or cooling fan) ...

...tv won't turn on, Lamp LED flashes until after three attempts to turn tv on all three LEDs flash. I have already replaced the ballast and the lamp. I checked the color wheel and it wasn't spinning ...

...led flashes fast then shuts off. When you turn tv on I get sound & no picture???? hello sir Just cliick below for how they repair there DLP TV and a picture guide how to replaced the lamp,fan and ...

Samsung HLN5065W...replaced color wheel and lamp. TV turns on and lamp illuminates for approx. 10 seconds, then goes out. All three LED lights on the front of the TV flash when this happens. Any idea?

...Samsung HL-P5063W Lamp LED blinks approximately 35 times followed by 1 long standby/temp light blink After this all 3 lights remain lit and flash....lamp/standby and timer makes a loud humming sound ...

...Samsung HL-S4266w TV When I plug in tv I get no picture and A sqealing noise. 1st the lamp led flashes 2nd stand by temp led comes on 3rd lamp flashes 4th all three led's flash (timer,lamp,and stand ...

samsung dlp - will not turn on - color wheel is intact but will not move - it sounds like TV is trying to start up but after three tries all three LEDs turn on - is this possibly a bad ballast? No,the

...Samsung LED TV (model - UA32EH4003RMXL) has been flashing colors red-blue-green-grey-black in cycle of 2-3 seconds. Has it entered a test mode? Or it's a software/hardware problem? Any expert advice ...

Samsung TV HL61A750A1F LEDs flashing this is a DLP TV without lamp (uses color LEDs). The three LEDs on the front are flashing and screen is black. Typically this would indicate a lamp issue. But for ...