...system was working fine. my samsung hometheater model is HT-BD1250 I believe the PROT actually stands for protection mode you must have accidently pressed or held a certain button i had this problem ...
i have a samsung HT-Z320 home theater system. when i turn it on it says PROT then shuts off. why? the player's amplifier is blown and needs to be repaired or replaced.
When I put on my DVD player, it says "hello, DVD, LOAD, PROT" and turns off... I assume "PROT" means some sort of protection mode. I would check to see if any of your speaker wires are crossed at the ...
...Samsung HT-C550 IT showing PROT and DVD turn off. What this is mean PROT? the problem is in the source, overheating or damage some transistors resistencas the source power, and be very visible if you ...
Whatb does it mean when the PROT comes on and then shuts off the dvd player hello, prot mean protect the output transistor may have blown or a capacitor has poped or swelled up or the just could be a ...
system turns on then the word "prot" appears and turns off. its protection mode a failsafe put in place to shut down the unit in the event of a possible critical failure .......maybe a fuse.
...system and see if it still says PROT. If it does then your amp is damaged. Look like AMP board malfunction complete parts available here: Samsung HT C550 Complete Parts AH41 D1311A AH41 01320C LS3FB ...
Question about 1000W 5.1-Ch. Home Theater System with Upconvert DVD Player
SYSTEM SHOWS ERROR CODE PROT AND SHUTS DOWN Check the impedance (resistance) on all the speakers and the speaker wires themselves. Power up the unit with no speakers or inputs attached at minimum ...
Question about Ht-c650w 5.1 Home Theater System - 1000 W Rms - Dvd Player - D
samsung dvd player display says "protection" . Wont turn on. turn on player. Display says Hello, then it displays Prot. Swtch off and disconnect and reconnect all the wiring especially speaker ...
Question about HTC5500 Theater System
when unit is turned on, it displays a code of (PROT) and then shuts off. the amplifier is bad and the main board will need to be replaced.
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions