...washer with a slightly used Kenmore washing machine. Everything works gret except on the spin cycle, the machine dances across the floor. I have evenly distributed the load, adjusted the feet and ...
...front of the cabinet removed so I could watch the drum. When the load is balanced the washer works fine and even when it is a little off balance the washer doesn't budge or even vibrate much. The ...
Question about WF337AA Front Load Washer
...from right to left and front to back. spin outthe adusting feet on the bottom of the washer. Completely remove the shipping bolt that hold the power coard in place. This solved the problem for
Question about ATF6000ES Front Load Washer
washer is not quite 3 years old and has started a loud banging sound especially when it spins, it sounds like an MRI machine One of the dampers has gone so the drum is allowed to move too far from its
Question about Energy Star WCVH6260F Front Load Washer
...spin cycle, the washing machine dances across the floor. Try to level machine. Whe empty try to reset back legs pulling machine from rear up front leaning on front legs. Try to balance your load
Question about Neptune MAH9700A High Efficiency Front Loading Washer
...dances across the floor and it has been leveled and went to the extream of screwing 2 by 6 foot boards to the subfloor thinking the floor was weak. From the many postings on the internet seem slike a ...
Question about WSXH208A Front Load Washer
...front load model wssh300g1ww, jumps across the floor during spin cycle, takes 2 people to hold it in place. ha ha ha! they do dance well dont they???,,, its the brum suport spring/s broken nothing ...
...front loading, and it seems to enjoy dancing across the floor when it spins, any ideas what we can do to prevent this, the floor has a laminate finish. The adjustable feet under the machine are ...
...Brand new installed and leveled washing machine dances to the left and won't stay still can someone help they make a bracket to secure the washer to the floor,check with dealer were you got the ...
...across the floor! It is on a ceramic tile floor. We leveled it, It does not rock when we try to make it do that. We even put vibration isolation pads under the legs. It just bounced more. are your ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions
