Questions & Answers for: ruud ugdg 10ebrjr

When my furnace goes to start the blower motor whines or sounds like it is having a hard time starting up? If you turn the blower wheel it seems to turn freely? Could it need a motor or a run ...

Ruud model # UGDG-10NBRJR does this unit have a pump for the water condensation to force it out. Unit leaks out the bottom. Or is the line blocked. Generally speaking there is no pump to pump out the ...

...ruud furnance model ugdg-100-auer it has 4 burners and on call for heat the first one will not lite, already cleaned out orfice found unpluged, the other three are doing great what can i ch On call ...

ruud furnace ugdg 10eamer not lighting, WANT MANUAL! My igniter is not even glowing, but I can smell some gas when we looked inside to see if it was lighting, so we shut it down. It was installed in &

Ruud Silhouette gas furnace ugdg 07 model blower stays on. The heat and air both work but it is pricing my energy bill higher. Whats the cause and can I just turn off the power to the unit (what about

...RUUD Silhouette II, model UGPH-10EBRJR. I also have the serial number if that's needed. Anyway, the issue that I'm having is that there's no heat. The AC works, as does the neutral fan. However, when ...

...Ruud furnace model ugdg-07 namgr will not light, new ignitor, new flame sensor, blower runs but no heat. Try pulling the rubber hose off the inducer power vent motor housing and pressure switch. Make ...

how do you repair your fan motor we have a Ruud UGDG 10E BRJR. WE WOULD LIKE TO KNOW WHERE WE CAN BUY PARTS FOR A FAN MOTOR AND FAN. check grainger.com or repairclinic.com

RUUD UGDG-10EAMER THE IGNITER COMES ON AND GETS RED AND THE VALVE OPENS UP TO ALLOW THE GAS TO FLOW IN BUT THE GAS DOESN'T INGNITE. I CAN IGNITE THE GAS WITH A LIGHTER AND IT WILL LIGHT & RUN. May be ...

house blower will not stop running. ruud ugdg-075auer is the fan in the auto position?