Questions & Answers for: will run but see no flames

FLAME GOES OUT AFTER SHORT PERIOD OF RUNNING THE UNIT STARTS WITH THE FLAME LIT, AS IT RUNS FOR A SHORT TIME THE FLAME GOES OUT AND COOL AIR BEGINS TO BLOW. ONE YOU CLICK IT TO THE OFF POSITION IT ...

Ad

Question about Heater-170,000 BTU Kerosene Deluxe

1 Answer

Flame light flashes after unit runs for awhile. I have a 170T and it will run for awhile and shut itself off and the flame light flashes and after trying to reset the unit it will not reignite. Check ...

Ad

Question about Heater-170,000 BTU Kerosene Deluxe

1 Answer

Carrier 90% *** furnace, fires up, runs until circulating fan runs for approximately 60 seconds, then the flame shuts down. The trouble code is 3-4 indicating a flame proving circuit problem. Three ...

Question about Neptune MDG5500AW Gas Dryer

1 Answer

mdg 4000aww turns on and heats when started. runs for 5 five minutes then flame goes out. ignitor glows but no flame. one minute later dryer still running ignitor glows, no flame. this repaets until ...

Question about Programmable Thermostat Heater

1 Answer

flames light then thats it! If ignitor is on the right side then flame sensor is at the opposite end. It is a round steel probe with a white ceramic top and a wire running to it that sits in the flame

I bought at Dometic propane/ electric fridge for my cabin last year. It has not run properly since. The fridge will light and run for a while with a blue flame but sometimes in the idle mode it goes ...

Question about RM2620 Refrigerator

1 Answer

Furnace Runs, and then just looses the flame I assume, the Draft Fan continues to run, then it re-ignites and runs normal, does not do it every time the furnace starts up Hi, Either the flame sensor ...

reddy heater runs but not consintently shuts down and have to restart it. model 165DT Shuts down in 5 seconds? If so, it is supposed to. If the flame is not perfect. Read on.. The ignitor (glowbar) ...

I have a Hayward h100id pool heater will Lite and run for about 20 seconds then go off the fan continues running. But no Flame put new igniter in same problem flame sensor dirty or bad also check ...

Question about RM2620 Refrigerator

2 Answers

GMS80903BNA goodman furnace. Short cycling, thermostat clicks on inducer spins up, flame kicks on, then blower kicks on. Everything runs for three to 4 minutes, then flame shuts off. Blower keeps ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Heating & Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...