Questions & Answers for: how to run auto scan

run the auto scan. When you press tv on remote to watch the tv, it takes me back to "run auto scan." Any suggestions? you need to select cable from off your remote and run the auto scan.even

...run auto at least 10 times. 130+ channels takes a long time. but when the scan is done - a box with the words "please run channel setup auto scan" stays on screen. I have repeatedly run the ...

...run the auto scan just press the key that displays on the screen when it ask run channel auto scan or go to menu and channels find auto scan then press enter I consulted with Insignia  TV ...

please run channel auto scan no picture just error message "please run channel auto scan" NO picture just error message "please run channel auto scan"

...run an auto channel scan A button on the back of the TV was accidentally pushed. Now it keeps telling me to run an auto channel scan. I've done it twice, but as soon as the scan is finished, it goes ...

...anymore because of the gray box on my television that is saying "please run channel auto scan" when I've down it atleast 5 times already it needs a cable attached from an antenna to auto run a ...

...Run Channel Auto Scan? I done all went to menu used the auto scan once that has completely scanned the words still appear "Please Run Channel Auto Scan." What gives??? Refer its user manual for ...

...run channel auto scan on Calypso TV I have the cable plugged into the back and the message on the screen says "Please Run Channel Auto Scan"! How do I do this from the remote? try going to settings ...

...Run Channel Auto Scan. I have tried every auto scan option at least twice with no luck. Someone suggesting resetting it by unplugging it overnight, and that didn't work either. When it scans, it does ...

run auto scan , I do this with no results , finds RF CH but that is it no signal and will not go back to TV mode just keeps up with the run auto scan box Main system control memory IC fault. Check and