Questions & Answers for: rubber wheels

Question about 14" Band Saw with Stand

1 Answer

...wheels Top rubber band rides up over lip of the wheel and jams up against the housing causing the saw to grind to a halt. This does not happen immediately but after a few minutes of running (1 or 2 ...

Ad

Question about 34 In. Zoom Series Riding Mower

1 Answer

....Engine runs great. Remove the cover on the very bottom under the engine, you will see a wheel with rubber ( the friction wheel ) on it, when you squeeze the handle for the drive you should not be ...

Ad

Question about L-373 Mechanical Sewing Machine

1 Answer

...an old New Home Sewing machine. Instead of a belt drive off the motor this machine has a slip on rubber wheel about an inch in diameter that is spring loaded and presses against the hand turn

Question about L-373 Mechanical Sewing Machine

1 Answer

Need a rubber wheel for a 1946 New Home. I bought a 1946 New Home sewing machine in near mint condition. My mother had the exact same machine . This machine doesn't have a belt but a rubber wheel on a

Question about L-373 Mechanical Sewing Machine

1 Answer

Rubber boot on front wheel shaft which comes from There are 2 rubber boots on front wheel shaft which connects the front differential with right front wheel. The rubber boot close to the wheel is shot

Question about L-373 Mechanical Sewing Machine

1 Answer

...rubber ... you can use just water and a lintless cloth, or special cleaner for "idler wheels" .. you can also clean up the surface of the wheel with a common eraser .. if the rubber has become hard ...

Question about L-373 Mechanical Sewing Machine

2 Answers

model 158.1786080: bobbin rewind will not rotate. Rubber on drive wheel seems to be worn below size limits.?? i think you have solved your one "Q" and your right .. the wheel is warren out or the ...

...ok could it be a dry bearing? No, its your axle drive or cv booth are the problem. Check your cv rubber booth if rip, check both side wheel. Rubber booth is a sealed rubber covering the cv joint

Question about Rear Drive Wheel Snapper Mowers

1 Answer

Is the rubber on the drive wheel on the snapper mower fixed to the metal hub? The rubber wheel part of the drive is not securely attached to the metal frame and slips when the mower goes up hill. ...

Question about Rear Drive Wheel Snapper Mowers

1 Answer

...remove the 2 or 4 bolts and drop pan inside you will see an aluminum wheel (drive wheel) also a rubber faced wheel whitch runs on the aluminum wheel at a right angle (like a needle runs on a ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Saws Experts

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66838 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39363 Answers

Are you a Saws Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...