Questions & Answers for: router point channel conflict

Question about BreezeNET WBS-DS.11 (871100)

2 Answers

...router will recommend a good channel. Or you can test each channels connectivity efficiency with a tool. Find the best channel you can and connect. Any normal interference should be gone. I can have ...

Ad

...channel on the gateway might help??? No way. You have to try relocating Wlan Router antenna or add external boosted one. Move to N protocol Router Change Cordless to 5 Gig band model. Check Micro ...

Ad

Question about 7760 (3CRWE776075US) 802.11a/b/g Wireless Access Point

1 Answer

...router?s channel to 1 or 11 (the default channel is 6) and restart the wireless computers. Physical obstructions: Your router or wireless computers may be losing connectivity because of physical ...

Question about Wireless-G WRT54G Router

1 Answer

...router config might have got itself corrupted; in which case a factory reset option could sort this out (you'd need to re-program the ISP settings, so make sure you have these first!). Its unlikely ...

Question about Wireless-G WRT54G Router

2 Answers

...point with the same channel, you may get problems, which will require logging onto the 572 and changing the wireless channel I do not have the siemens gigaset se 572 router but the wireless function ...

Question about (2701HG-B) Wireless Router

1 Answer

router handle? The 2701hg-b Wireless Access Point (WAP) has 4 ethernet connections, that's the physical limit, for that, unless you "cascade" a bridge or another router off of a port. It also supports

...router. You can change the channel it is operating on through its control panel. Start by logging into your wireless router: Go to http://www.routerlogin.net(which points to http://192.168.1.1 and ...

Question about WNR1000 Router

1 Answer

...router / access point channel conflict every time and so can't scan wirelessly! Could it be both wireless from router and access point broadcast with same channel (either 1, 6, or 11) If you don't ...

...router/access point channel conflict. What is this as I have no idea what to do. There are 11 wireless 'channels' in the US that a wifi router/access point, can be set to.Sadly the vast ...

...router to an unused channel or one that is currently used but has the weakest signal strength. This will minimize interference with your wireless router from other wireless routers and access points ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Computers & Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...