Questions & Answers for: Ford round off

...cant get it off the van If you mean those lousy soft bolts they use to hold the starter in place rounded off when you tried to remove it then the answer is simple. Same thing happened to me, and I ...

off. I looked above the break pedal and noticed a round blue thing was broke. This blue thing keeps two pieces of metal from touching. What is the name of this "round blue thing" and where can I get a

...round connectors off and install the rectangle ones? If so whats the wiring? Or can you purchase a retrofit connector that allows the round connector to be plugged into the rectangle one? All help is ...

...there is a bolt that connects it in the very rear of the truck above the axel and that bolt is rounded off with about an eigth of an inch old brake line in it, and that nut is totally rounded

...SOCKET WRENCH OR BOX END WRENCH TO TURN CENTER BOLT COUNTERCLOCK WISE TO RELEASE BELT TENSION.WHILE SLIP BELT OFF THE ALTERNATOR. IF BELT TENSIONER NOT THE ROUND TYPE YOU NEED THE BELT TENSIONER

...scrape off the old gasket and replace it with a new one your right its round,the only thing that needs aligned is if there is a small hole on the edge this should be at the top 12 o'clock ...

...Round "circle" that attaches to lever comes off column...i guess i can use airplane cable to try to give it a quick fix- whats a better one? I haven't seen any good fixes for this ...

i am trying to remove drive shaft bolts and the head is rounded off they have been in since 1988 ford ranger 4x4 xlt Turn the driveshaft til you have most room to get in with a pair of GOOD visegrips,

round piece on belt assembly is smoking there is one of the round piece on the belt assembly that is smoking looks like it broke off replace the belt as if anything is missing then the belt is no good

...engine first with no plugs in a few times the with them in dont run for to long just ten min then turn off. give a good check round then should be fine to run. change belts etc as soon as