Questions & Answers for: round dimmer switch stuck

Question about Ceiling Fan Light Switch Control

3 Answers

...dimmer switch that takes the place of the wall switch. It has a round knob, is 120 volts and wires right to the black lead where the switch was wired. This will dim the light when you turn it to what ...

Ad

Question about 1996 Tacoma

2 Answers

dimmer switch; the round knob on the lower side of the dash. It may be turned down, or it has internally failed. To check it, simply use a 12 volt test lamp, or a volt-meter. Unplug the dimmer switch,

Ad

Question about Cooper Wiring 9534DS Smart Dimmer

1 Answer

...dimmer it's the kind that is round, but the wiring is 2 black wires, 3 white wires. And we are trying to install the new Cooper dimmer and we have no idea why we can not connect it .We need your help ...

...time . Its like the dimmer switch is stuck on high . Dave Headlight Switch....or some call dimmer switch...you must remove steering wheel to complete job....part is around $110 at Autozone or ...

Question about GL-603P Glyder 3-Way 600 Watts Preset Push On/Off Incandescent Dimme

1 Answer

...dimmer switch) on - off by pushing the button in center of knob -- pushing button does not turn dimmer on -- seems to be stuck in the off position -- is dimmer defective? Sadly, yes, it just sounds ...

...on 2004 Ford Expedition, dimmer switch not working The dimmer switch does not disengage the high beams. How do I get my High beams to turn off when the switch/lever is not working? (2012) Ford ...

my sewer pump will not stop running and just keeps swirling the water round and round without pushing the water up into the pipe. it has been running for over an hour even though no new water is being

...dimmer switch stuck on high beam dimmer switch will not change to low beam & no dash lightsa at all You could have two different problems . I have had two 1999 wranglers an the dash panel going out ...

round lights) switch on. When I turn 1 more click to the right the main driving lights do not switch on. This is likely due to a dimmer control switch. put the lows on and wiggle the switch around and

round dimmer switch? I have an old school dimmer switch that pushes in to turn on and off. You turn the round knob to dim it. It is getting difficult to push it in, but it still turns easily to dim or

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Dryers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...