banging sound while running The banging sound your hearing is normally caused by drum rollers having flat spots on them or in need of lubrication. If it is a front load machine you will need to remove
...banging against the housing. Thermal expansion of parts changing size because of the heat could explain why it doesn't make the sound all the time. You could, at your own risk, watch the dryer run ...
roper dryer i hit the push start button,it starts,i let go it turns off. same thing after 3 attempts.now it doesnt even start and i smell a burnt smell.checked all wires, they seem ok get it looked at
...and remove the scrap wood from under the drum. Check to make sure that the rear drum seal fits properly over the lip on the rear bulkhead. Position the new belt where the old belt was, with the ...
Roper, and numerous dryers, maybe it will work for you. http://www.applianceaid.com/images/belt-config.JPG If you hear a loud bang while your dryer is working, and you notice that the drum has stopped
Roper,etc...not sure if it will apply to your dryer, but one thing for sure is the above statement is correct for your dryer. I will also include a link to show the belt configuation -----------------
Usually answered in minutes!
1,743 Questions
1,329 Questions
1,410 Questions
1,123 Questions
940 Questions