Questions & Answers for: roller stopped spinning

Question about 37603 Upright Vacuum

1 Answer

roller stopped spinning The vacuum still has suction and everything sounds o.k. I have checked the belt and it is not broken. The roller has simply stopped spinning. Any suggestions on how to fix this

Ad

Question about Smartvac 4870 Bagged Upright Vacuum

1 Answer

roller just stopped spinning when the handle is only raised half way. So in order to clean the rug, you have to be slumped over with the handle far down. Once you lift the handle more than half way up

Ad

Question about DC17 Animal Bagless Upright Cyclonic Vacuum

1 Answer

...get the main vacuum to work... what should we do? is there hair, strings, twine wrapped around the roller? perhaps this is the issue, is there still suction by the rollers or has this stopped as

Question about DC17 Animal Bagless Upright Cyclonic Vacuum

1 Answer

...roller keeps spinning. Do I need a new front roller and pulley or do I just need a new drive belt?? This will require a new front roller. The drive belt is usually fine when this happens. Just the ...

Question about U5780-900 Windtunnel Cyclonic Bagless UprightVacuum

2 Answers

...roller to keep it spinning. Horrible design flaw. I am an engineer and find this pathetic. Hope this helps someone. Same problem. Brush won't turn. Changed belts, same thing. Free spins when lifted, ...

Question about Ball DC24 Bagless Upright Vacuum

1 Answer

...roller that spins with little brushes stopped suddenly and no longer spins. I pressed the red little knob at the end of the roller but it doesn't fix the problem. open up the roller area check to see ...

Question about Ball DC24 Bagless Upright Vacuum

1 Answer

serviceable. Enter your model number to see parts for your dryer. Help me find my model number Drum Roller Axle This dryer has drum support rollers. There will always be two supporting the rear of the

...series will break if the roller stops spinning or spins with high amount of resistance. Remove the brush roller and check that it will spin freely, if it does not it would need repair or

...light loads. Any other suggestions? Hello, I have a good idea that it may be the following; Drum Roller Axle This dryer has drum support rollers. There will always be two supporting the rear of

...roller is heating up correctly but the rollers are not spinning, there may be a few different causes. Check to make sure that the rollers are properly lubricated. If they are dry or dirty, they may ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Anonymous

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...