Question about Bostitch Coil Framing Nailer
...nailer is old but worked fine until recently. Make sure that when you run with one gun that your psi is between 90-110. You may need a kit. Is it an RN45 or 46? Go to Stanley Bostitch online and look ...
Question about Bostitch Rn45b1 Industrial Coil Roofing Nailer
RN45 coil nailer. It sometimes does not feed nails. When I open the magazine the driver blade has not retracted. Gun does not leak, o-rings in drive section look to be in good shape and are lubricated
Question about Bostitch Rn45b1 Industrial Coil Roofing Nailer
...RN45 roofing nailer won't feed the nails I fully rebuilt it thought that was the problem, no luck same problem. Any suggestions Thanks my RN45 roofing nailer won't feed the nails I fully rebuilt ...
Question about Bostitch Coil Framing Nailer
rn45 roof nailer Arrow on the Rn45 lower bumper points toward the driver, however don't worry too much about it, because it will work either way. There is a sharper edge on the lower side of
Question about Bostitch Coil Framing Nailer
...nailer rn45 has an adjuster for depth on the front. Rotate the black knob for proper depth. If adjuster does not have an effect, most likely the driver oring is worn. Ez check for worn driver oring. ...
Usually answered in minutes!
317 Questions
162 Questions
122 Questions