ring. When I tried to open the phone, I broke the plastic piece for the headset at the top. It is still in there with the top part missing. Would this have anything to do with the problem. Please help
...top peice and the pipe ? There is an o-ring in the filter head, That seals the standpipe (the pipe) to the filter head. (top piece) My advice would be to take a nylon stocking and wrap it around the ...
...top section) part of the valve. The O-RIng may look like a wagon wheel that is missing a spoke. its called a spider gasket most pool supply stores have them get the model # off filter so they know ...
Question about Krystal Clear Model 635 Pool Filter Pump 1500 Gph
top is a black ring with a big round thing then the top with the hose on it screws on any way bought at walmart Did you ever get an answer? I am finding the same problem and have called, e-mailed, and
Question about SAND FILTER, PRO SERIES
top mount multiport valve SP0714T I need help with a leaking problem for the Sp0714T. Water is pouring out all around the ring. I just installed a new multiport valve and water is leaking all over the
Question about Krystal Clear Model 635 Pool Filter Pump 1500 Gph
...the top, checked the o ring and it seems ok, if a bit high in places, maybe stopping it from screwing all the way on?? I live in Bosnia and cannot find replacement filters for Model 604 Filter ...
...ring securely. Thus the band holding the top and bottom of the unit together does not securely fit. Does anyone have any tips on how to correct this problem? Will a new o-ring help? I wish there was ...
...sealing issues are contributed by a dry ring seal that gets pinched while securing the top half of your filter assembly. What helps this issue is seal lubricant. This is what I use for this
...top of the sand bed. To avoid this problem it's wise to replace this O-Ring every few years. And make sure to follow the manufacturer's recommendations regarding the amount of sand to fill when ...
Question about SAND FILTER, PRO SERIES
...top and bottom and lubricated the recesses IN addition to the o-ring, don't hold back on that lube either. And lastly although it sounds odd, dont over-tighten the nuts, tighten them slightly over ...
Usually answered in minutes!
8,663 Questions
6,597 Questions
5,420 Questions
5,130 Questions
4,425 Questions
