Questions & Answers for: Subaru Impreza ring sizes

Question about 1996 Impreza

2 Answers

...which is really nice. Take off the wheel, brake caliper (I hang this by a piece of wire from the spring, saves disconnecting and bleeding the brakes) and take off the disc. Take off the main hub

Ad

Question about 1998 Impreza

1 Answer

after vehicle is driven some distance and vehicle is hot the awd is binding up you can feel it as you drive around roundabouts and when you go to park and turn to full lock it binds up and make a ...

Ad

eng. shakes spits/sputters oil in spark plugs engine shakes real bad it spit and sputters no horse power bogs down and now my spark plugs leak oil i changed the spark plugs clean the coil and spark ...

...after the shaft was repIaced, I would verify that the new axle that was installed had a reluctor ring on it. Most front drives have the reluctor ring (a toothed ring) for the speed sensor on the ...

when we start the car then stop the motor wont turn off to stop your ignition switch is worn need replacement be careful not to have to many keys on the key ring does damage your switch

how do you find the engine size of a subaru impressa 1998 Look under the hood there should be a white lable, on that lable will have the year and size of engine and other info., your car came with one

Question about 1995 Impreza

1 Answer

...gaskets that plug over the spark plug, is this due to a cracked valve cover gasket? Check the firing order tu might have installed it differently, clean the Hi-TENSiON wire terminals on the ...

i need to know the size of the o-ring on the bottom tube of a power steering reservoir that goes into the pump on a 1995 subaruimpreza 1.8L motor TAKE THE OLD O RING WITH YOU GO TO DEALERSHIP OR ANY ...

I have a really bad oil leak on a subaru impreza estate ej20 lump 1995 i literally put oil in it and it practically falls out the bottom, now i know this is not good. however i just want to know what ...

Question about 2008 Impreza Wrx

1 Answer

...the starter is in correctly. IT appears that the starter pinion is not meshing correctly with the ring gear and that is your noise . It goes after starting because the pinion disengages from the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...