Questions & Answers for: right turn signal doesnt work

turn signal 2006 pt cruiser on drivers side rear turn signal flashes double time front turn signal doesnt flash at all The turn signals flash depends on each and every bulb working correctly. When one

Ad

Question about 2006 Accord

1 Answer

...doesnt say in my owner's manuel or the fuse cover. hi there is a two fuse box one under the bonnet and one beside the drivers right leg thats for australia maybe different to your country check the ...

Ad

Question about 2002 Accord

1 Answer

...turn signals wont work. If you havent done it, try wiggling the button, press it hard and release it to see if it springs back to position. If that doesnt work, try forcing it back with a precision ...

turn signal indicator doesnt work accord 1998 turn signals work but indicator lights do not when i put on the turn signals, but they do work when i put on the hazards i think its the indicator relay ...

...right lights works fine, but both left turning lights do not do anything. I decided to replace the rear bulb but that didn't work either. Any ideas? First check both front and rear lft side bulbs. ...

...right turn signal is stuck on (even when car is off, so it constantly kills the battery) checked all the fuses. Signals don't work, but right is constantly on. What could the proble The right signal ...

...I put the turn signals on they make a buzzing sound then the light goes off so i'm not sure if the cars behind me see that I am going to make a turn either right or left. Most likely the relay is

...right tail light is out but brakeand turn signal works my 2006 dodge dakota passenger side running light doesnt work ,,i noticed a blue/white wire disconnected, brake light and turn signals work on ...

right turn signal light on dash doesnt work and flashes really fast. Buld on right side was replaced and works when lights inside right flasher light on dash doesnt work with hazzards or turn signals.

Question about 2001 Ranger Regular Cab

2 Answers

...turn or right turn position, the BCM receives a signal from the turn signal switch. The BCM then sends an on-off voltage signal to either the left or right turn signals and their instrument panel ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...