Questions & Answers for: ricoh rw 240

error code sc-401 Area is transfer roller area. Short to ground /could be toner build up in transfer area or poor connection

error sc300 what is this That is a charge corona error. The charge wire is likely broken or just very dirty and must be cleaned. I can't begin to tell you on this forum how to take the machine apart ...

Ricoh W2400 error SC401 The machine has a dirty ID sensor that must be cleaned. It can be cleaned without removing anything from the machine if you are very careful. Open the clamshell to access the ...

rw 240 driver for windows 7 Go to this web site http://www.ricoh-support.com/ and see if there is what you want. The equivalent model is Aficio 240W. Go to the quick search and in the left tab scroll ...

rw-240 with plot base 3.7.1 on an xp machine. It started giving me an error saying there is no tray for selected media. I have tried with both 24x36 and 11x17 sizes using pdf and direct from acad 2010

could not find license hardware Something happened that caused the kernel driver for the card to be lost/altered. Easy fix is to turn off and unplug computer. move the PCI controller card for PLOTBASE

...or Plotbase software for my Rocoh 240 You'll need to go to ratio.us for the Windows 7 upgrade software version 3.7.4. It's not a Ricoh offered version. how to connect Ricoh copier with computer ...

rw240 plotbase 3.7.8 3.8 is the RATIO offered upgrade for Windows 7 install of PLOTBASE & SCANTOOL. Check for information on it on ratio.us website

rw 240 scantool, gives the following error message:Could not create directory ...The filemane, directory, or volume label syntax is incorrect.This is my first time using this plotter/scannerRicoh RW 2

...RW-240 Plotbase (Software for the plotter) will not show any files that have been sent to print? I've never experienced this problem before, the file usually shows up immediately. It is not ...