I have a z4mplus and it is saying ribon out but we have ribon in there how do i fix this check the settings
error condition ribbon out is dirty ribon end sensor, clean with a soft cotton swab, may help.
...Zebra Im having an "out of Ribon" message but the ribon is new and its placed on the printer. What could cause this? possible need to recalibrate the sensors, go to driver, and send the command
Zebra S500 printer and the Printer/Ribbon light continues to flash--so we can't print to it. We've re-threaded both the paper and the ribbon with still no luck. Any suggestions? Thanks run calibration
printer doesn't recognise the color ribbon and print only in mono. Try !SA command to calibrate ribon and printer, send command from the driver
...zebra printer z4m is sayin "ribbon out" but it doesnt take ribbon. So how do i fix it? go to the setings, and check Direct Termal or Termal transfer, Have to be Termal transfere, then run ...
error condition, heads open, ribon out This is usually a sensor problem, make sure it is dust free and no labels are stuck around it. Check the label and ribbon paths are correct and switch off and on
zebra Printer for testing. When a label is printed it just prints 1/4th of the label,then the printer stops and paper/ribbon light,Pause light and data light is on.When I open the print head,The label
330i When i put the nwe ribon they showe me mechinical eror hoe can i fix it please check the part number of the ribbon. seems the shipp from ribbon is faulty, try other ribbon.
...Zebra printer V53.16.7Z The "ribon in" warning is because you set the printer to print DIRECT THERMAL insted THERMAL TRANSFER. The first mode is for printing directly on the thermal labels, not for ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions