Questions & Answers for: rf connector tv

Question about C27A24T 27" TV

3 Answers

...RF Connector I have a 27" Zennith tv and the rf connector(i guess, the cable jack that you plug the cable in to) on the back of my tv is broken off. Is there any way to fix and/or replace it? Its ...

Ad

Question about 4-to-1 Composite/S-Video and RCA Audio Switch (SVID410IR) KVM Switch

1 Answer

RF out to the F connector of your TV via a short RG59 Coaxial cable terminated both ends with FP-5 connectors.. You have to select either 3 or 4 (as the case may be) in your TV and set your VCR to VTR

Ad

Question about AT2002S 20" TV

1 Answer

...RF Connector I have a 27" Zennith tv and the rf connector(i guess, the cable jack that you plug the cable in to) on the back of my tv is broken off. Is there any way to fix and/or replace it? R f ...

Question about AT2002S 20" TV

1 Answer

...RF connector (none from HD/DVR box), S-video connector, and Video Component/Y Pb Pr hookups. Which ones do I use? My other TV has Video and Audio L/R, this TV does not. Well first off i am assuming ...

Question about AT2002S 20" TV

2 Answers

...connector into the bottom "in". It worked on mine. Hope this helps. What kind of TV do you have? If it only has an RF input on your TV you will have to get an RF modulator from Radio Shack or another ...

...RF connector at a electronics store..Please visit a commercial dealer, Radio Shack is to limited! Pull the tuner out of the tv board, open the cover that contains the solders. Lets hope the board is ...

...on your set. To use both the RF mod. and the DAC converter to the same TV, use an A/B switch for F-connector coax, or follow the directions for the RF modulator to make the correct

...those inputs {most} and connect the VCR RF output on channel 3/4 to the RF {cable connector or 300ohm converter} input on the TV. The VCR would convert the RCA jack stuff to channel 3 or channel 4. ...

Question about DS31520 31" TV

1 Answer

...box. If the RF connector you are looking for in the back of the TV is gone...you will have to find a TV tech to attach a new RF connection to the tuner of this TV. Hope this will help with a

Question about DTV102 ATSC STANDARDDEFINITION TV CONVERTER BOX

1 Answer

...rf input of TV. (set both units to channel 3, or 4 --must match) or connect three RCA connectors (either three cables or single cable with Yellow-Red and White connectors) to the matching connectors ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...