Questions & Answers for: rf ch tv set

rf switch to ch.4, if that doesn't help make sure that there is nothing connected to the in port on the rf switch and try it again, also make sure the connector of the rf switch has a straight pin and

...ch 4 only, so I tried to follow that procedure again to reverse it in case it toggled. No luck. What do I do now, coach? 1) Set your TV to channel 3. 2) Insert a pre-recorded tape into this unit. 3) ...

...[VIDEO/TV] on the remote control. ? If noise appears, change the RF output channel of the unit to CH 4 by pressing [VIDEO/TV] for 3 seconds. The RF output channel will alternate between CH3 and ...

how to play snes on samsung 46" lcd Connect the RF modulator to the cable input of your television and set the TV to either Ch. 3 or 4., depending on what channel the RF modulator is set to.

...RF output channel (CH 03 or CH 04). Turn the DVD+VCR off and then on Set the TV to channel 3 or 4 depending on the RF output channel you selected. Now you can watch the DVD+VCR playback on CH3 or CH4 ...

CH 04). ?RF 03? or ?RF 04? appears on the front panel display. Solution 2 Cable Service With Cable Box If a cable box is required in your cable system, follow the instructions shown below. This hookup

...to change/set the RF output channel. The number of indicators lit indicates the channel number (CH 03 or CH 04). Turn the VCR off then on again. Set the television to the VCR channel (channel 3 or

...RF outputs come in the bands VHF1 CH3 or CH 4 . Also it comes mainly set from factory in the UHF CH36. Iff there is interference in your area due to local channel the channel can be shifter by ...

...dis-play window. 3. Press CHANNEL (V/v) on the front panel or CH/TRK(v/V) on the remote control to change the RF output channel (CH 03 or CH 04). 4. Turn off the DVD+VCR. It might solve the

...RF CH and Found-2 Why am I receiving only 2 channels? I bought an OTA antennae. It is just a flat pad w/ a wire that connects to the TV. I attached the pad to a nearby window as suggested. When I ran ...