Questions & Answers for: revolutions rotor tdc

...the piston is on its compression stroke .then align all cam and crank marks. set dizzy on No 1 cylinder (rotor pointing at #1 plug wire) . rotate engine 2 revolutions and recheck all marks. Fire ...

Ad

...TDC means #1 piston is all the way up in the cylinder. Here the rotor should be at #1 plug wire at the cap, if not, you may need to rotate the crank one more revolution. yes, buy manual, clean cam ...

Ad

...rotor number one terminal position is because you probably have the TDC position 360 degrees out, there are two spots concerning TDC because for every one revolution the camshaft turns the crankshaft ...

Question about 1986 LS 650 Savage

1 Answer

...TDC is then pull off the cap so you can see the rotor/flywheel turning and it has marks on it. turn it until you see the T mark is lined up. check clearance. If no clearance turn the motor one ...

...rotor is pointing. if button is off 180 degrees, turn one full revolution to tdc, then check rotor button. when it gets to number 1 your set. that is youre number 1 wire location. have a good day

Question about 1999 Ram

1 Answer

...TDC with the line on the pulley. The rotor should be pointing to the #1 spot on the distributor cap. (If it's off, it will be facing 180 degrees off, then turn the crank one revolution.) If this ...

...TDC rotor is lined up with number 1 the car was running fine before I changed the valve gasket Honda CRV/Odyssey 1995-2000 Repair InformationDistributorREMOVAL & INSTALLATIONPrintREMOVAL & ...

...TDC, drop in the ignition distributor so the ignition rotor is aligned to No1 ignition wire tower on the distributor cap. The rotor needs to be set back a little before setting it in as to compensate ...

Question about 1990 Sierra

1 Answer

are on the exhaust stroke (TDC) of No. 1. Turn the crank one revolution, and come back to the zero mark. If rotor was pointed opposite before, it should now be directly at the number 1 plug wire tower

...rotor should point to cylinder #1 or the cylinder opposite it on the distributor when the engine timing mark is on TDC if you have everything back together correctly. The distributor turns once for ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...