Questions & Answers for: reverse stitch control working

...reverse. Can you give me some suggestions that might help correct this problem? My back swith button is not working on my Kenmore sewng Mchine.  Can you tell me what the problem is? Be sure that ...

reverse stitches - put a No1 foot back on and do a honeycomb stitch or simply check that the reversing button reverses the stitching - if not, that's your problem and the machine should go back to

...Stitch With Auto Tie-Off Function." It says: 1. Press the foot control and the machine will sew 4 stitches in forward and then 4 stitches in reverse and continue to sew in forward UNTIL the foot ...

...reverse stitch control is worn and does not work. How can I get a replacement? After seeing this, I went onto sewingpartsonline.com and was able to order a new reverse lever for $7.95. Considerably ...

Stitch length control not working and direction of stitching is reversed Stitch length is very small.. even at setting 4 of the control, but its moving. Instead of pullug the material away from me, it

for a reverse, it is a mess For all machines that I have experience the reverse button or control is only use to lock the finishing end of your sewing & if reverse all the way would not work right

...any widths. the forward /reverse control sets the stitch length(width) the closer to neutral the smaller the stitch full forward or full reverse is max stitch length the machine may need to be ...

reverse.the stitch selector knob will not turn either. It will sew in reverse. how to free up the button and knob. Stitch selector knob and the reverse button are stuck but it will sew in reverse. The

...Reverse sewing button and the Securing stitch control button are both similar, to sew in reverse.However everything about the my Bernina 1130s is working. The machine does stitch forward. Ther is a ...

...reverse stitch? It's not stuck, just won't stitch backward when reverse key is engaged. There are a few potential causes of this issue. It could be due to a mechanical issue with the machine, a ...