Questions & Answers for: reverse pt cruiser 2001

Question about 2003 PT Cruiser

1 Answer

PT Cruiser when within an HOUR i am stuck in reverse when i was having NO prob with manual transmission before The tie rod ends should not have anything to do with the transmission. Was the car jacked

Ad

...reverse. why? my 2001 pt cruiser will not go into reverse. why? I can only go forward. It is a manual trans. clutch The problem is more than likely the shift fork. It sits around a slide hub in the ...

Ad

...PT Cruiser 2.0 ltr 90K on the clock, always serviced. Now will not go into reverse gear. All other gears and clutch operation is fine....any suggestions the shift cables can be adjusted but you will ...

...pt is stuck in the reverse gear an wont come my 2001 pt is stuck in the reverse gear an wont come out even if you are pressing the break an pushing button on shifter look on the base of the shifter ...

Question about 2001 PT Cruiser

1 Answer

...pt cruiser is stuck in 2nd or 3rd gear, wont shift gears, when you get to 4000 rpms its like your pumping the gas peddle. reverse does work. did change fuses for the heated mirrors and the horn. was ...

...PT cruiser 2001 manual will not go into gear. Over the last year in has popped out of reverse a few times. When it stopped shifting I was trying to go into 3rd gear, it began to grind and then would ...

...pt cruiser 2001 is starting but when I stop at a red light and then go again it stalls sometimes going forward from reverse it does the same thing, what do you think could be wrong with it? sounds ...

...pt cruiser is having problems when I reverse then go forward it doesn't go into gear.When I stop then want to go again it stalls, would sure like some advice. could be the linkage in enginge ...

...pt cruiser does not reverse i got the codes that the ratio reverse is incorrect The car drives but only goes up to 10 and won't reverse every time I steep on the gas sounds like air and a leaking ...

2001 pt has reverse and 2nd or 3rd speed forward willnot upshift no manually shift from 1to3 Run an obd scanner on it for fault codes.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...