Questions & Answers for: resetting sump pump

Question about Toyostove Direct Vent Heater: Toyostove Laser 73 Shipping

2 Answers

...pump first. you already know the igniter works. check the fuel filter in the fuel sump might be clogged. check the fuel sump float valve, might be stuck, supposed to hang free in the sump with needle ...

Ad

Question about Aquarius WMA42 Front Load Washer

1 Answer

...initailly then managedto reset for normal cycle but machine failed to respond then started flashing eco and fast lights. Probably blockage in pump or sump hose from drum to pump. Remove and

Ad

Question about Toyostove Direct Vent Heater: Toyostove Laser 73 Shipping

2 Answers

...sump. I doubt the fuel pump is bad . Once the flooding is controlled you can check the pump. Remove the fuel line at the burner and put a cup under it. Try to start the stove. When the Med or Low ...

Question about Ace& Battery Back-Up Sump Pump

1 Answer

...and it is interpreting it as a bad battery or corroded terminals. It could even be where the cord goes into the sump pump. You will have to search it completely to find it. The alarm itself is

Question about Submersible Sump Pump, 1/4 Hp

1 Answer

Sump Pump Backup System Alarm Keeps Screeching Have a little Giant Sump Pump Backup System (SPBS-12). Been working fine for years, all of a sudden the Alarm keeps going off. If I hit the reset button,

Question about Automatic Sump Pump Float Switch

2 Answers

sump pump wont kick off. There is no water in the sump and the float is fine, but the motor won't shut off. I unplugged the pump as to not burn up the motor, and thinking it may reset itself, but when

Question about Toyostove Direct Vent Heater: Toyostove Laser 73 Shipping

1 Answer

...pump out of the sump, take the plastic nozzle off of the pump, and manually free up the pump by shoving a pipe cleaner down the intake hole. Put it back together, hit the red reset button, and start ...

Question about SHE45M06UC Built-in Dishwasher

1 Answer

...sump meets the tank (do not remove these screw!!) Once the screw is taken out you will be able to remove the pump cover, check for debris, glass fragments or chips of plate etc. With the cover off, ...

Question about SHE45M06UC Built-in Dishwasher

1 Answer

...sump meets the tank (do not remove these screw!!) Once the screw is taken out you will be able to remove the pump cover, check for debris, glass fragments or chips of plate etc. With the cover off, ...

...resetting the freeze light blinks and nothing happens. The water inlet valve never opens (the sump is current ly empty after being cleaned). There is water pressure at the valve, the valve has been ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Heating & Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...