Questions & Answers for: resetting lamp hours sharp dlp

...SHARP XR10s and need a bulb need a replacement bulb. whats the part # and are the XR-10s &XR-10sl using the same bulb? Thanks scott Hey, XR10S and XR10SL is the same. The Lamp is SHP93 if for ...

...lamp hours are over the limit, you need to reset the lamp timer by holding down the enter, down, and menu buttons and press power. if that doesn't work and you're not getting any leds lit on the ...

hours etc. The lamp may have died of its own accord prematurely and obviously unexpected. With the power and fan coming on my first throughts are either the lamp or the lamp ballast (powers the lamp).

lamp had only 300 hrs) so I will not purchase a replacement (approx $190-$300 w/various online sources) until I can determine if the unit works. Sharp, of course will not warranty anything beyond the

lamp in my xr-11xc sharp projector, reset the timer, and it turned on. after shut down, i tried it again, and now the standby light comes on, i hear the fan spin up, then the lamp light blinks, and it

how to reset lamp timer for sharp xr 30s projector Reset the lamp timer: While simultaneously hold down Menu/Help,Enter and v down arrow button on the projector.Your projector lamp hour show "0000H"

lamp on my sharp xr-10x L. I cannot get the bulb to turn on I have lights so there is power but the lamp is not on. You must reset the lamp timer. Check the manual or sharp website for instruction how

I replaced the lamp, then the projector is not switching, but the standby and lamp indicator are red, no button is working. how can i reset? Check if you need to reset the lamp life time counter clock

resetting the lamp hour do the following 1. Plug the power cord into the AC socket of the projector. 2. While simultaneously holding down MENU/HELP, ENTER and DOWN ARROW button on the projector, press

lamp hour of your projector. For resetting the projector do the following. While simultaneously holding down MENU/HELP, ENTER and Down arrow button on the projector, Press STANDBY/ON on the projector.