Questions & Answers for: reset uhf default settings

...UHF/VHFradios, I was able to reset both radios to factory setting by pressing the menu and ptt for a few seconds while I turn on the power. Now I can communicate on both radios. My question is how do ...

...reset to factory settings...Thanks Bill F121  VHF, F221 UHF they both use the latest Version 1.7.For F121 Factory default as follows:Open your CS-F100 software, enter RX TX frequency below, and ...

...uhf-4-watt-10-channel-on-site-two-way-radio.html both of those radios program the same way. However to reset that radio to default or add any frequencies there is no way to do that without the ...

...UHF channels ie 1 to 40 ? Hi Clive, Simple method is to turn off the radio, take out the batteries, and wait for about 15 minutes or longer. Then replace the batteries (making sure they're fully ...

...UHF) tv's - by resetting to default on receiver I got the close captioning back to TV1 - but cannot get any of the TV2's to reset the close captioning - all the tv's are set ...

...reset (SYS and ALL), but this not resolve the problem. The rig is 2 years old and before this works OK. The FTM-10E is the european version of the dual band amateur radio capable of transmitting in ...

...UHF channels were fine. The steps I used to reset the TV: unplug for a while. After reconnecting the power, go to the Tools (Options) menu and then reset the TV to the defaults. Then I did a new ...